Before you get the best commercial garage door repair near me in Celina, learn how you can fix your broken garage door that won’t open or close.
If your commercial garage door isn’t working the way it should, that immediately tells you there’s something wrong with it.
Having to deal with broken items around your business can be frustrating at times.
An issue like a broken commercial garage door needs to be fixed promptly; otherwise, you’ll leave your belongings exposed and vulnerable to harm.
After all, the garage is where you keep most of your business’s valuables or vehicles.
Therefore, security must be a priority.
But before you search for the best commercial garage door repair near me, check if it’s an issue you can handle on your own.
In this article, we’ll be showing you how to fix a garage door that won’t close.
Let’s get to it.
Easy Ways to Fix a Garage Door That Doesn’t Close
Garage doors are important because they provide added security and make your business assets and staff stay safe.
But if the door won’t close, then you’re exposed. There are different reasons why your door won’t close.
Here are simple ways you can do a repair on a garage door that’s difficult to close.
1. Check the Sensors
In most cases, when the garage door doesn’t close, it’s usually a sensor issue.
Safety lasers are usually attached to the garage door opener. These lasers are put near the tracks close to the floor.
When an object is obstructing the garage doorway, the sensors notice this and stop the door from working, keeping everyone safe.
In most cases, the sensor lenses can get dirty, so they can send wrong signals to the opener’s control board.
Just wipe the sensor with a clean, soft cloth. This should solve the problem.
If the sensors are blinking, it means they’re not aligning properly.
To fix this, just lose one of the sensors and align it properly till the small light is stable, then tight it back.
2. Check the Tracks And Rollers
There are times when your commercial garage door will not close beyond a particular point.
Check the tracks to get rid of anything that might be blocking it from closing completely.
If your roller is bad and the track is bent, you can experience the same issue. So check any of them for any damage.
If there’s any part that’s bad, you can use clamps to bend it back to its position.
Or you can hit it with a hammer carefully to bend it back. But for this, it’s advisable to find a professional garage door repair near me service.
Also, check the overhead track that comes from the garage door opener.
At this point, it’s best to add silicon-based lubricant to the rollers.
3. Inspect the Trolley
The trolley is what connects the garage door to the opener. It’s usually that part that has a rope hanging from it.
The job of the rope is to engage and disengage the door from the chain that the garage door opener uses.
Note this: Your trolley may be in bypass mode if you notice that your commercial garage door is moving freely.
To fix this and take the trolley out of the bypass mode, pull the rope toward the door.
Once you do this, activate the garage door opener, and the trolley will key back to the chain and work well.
4. Check Your Remote
Maybe you’ve been trying to close the garage door with its remote, and it’s not responding. Check the batteries. They’re likely dead.
Sometimes, a power surge can wipe clean the memory of your garage door.
For the dead batteries, just change them, and the remote should start working.
But if it still doesn’t work, you may have to reprogram the remote. A garage door repair Celina, can handle this one for you.
Or you can do it on your own with these steps:
Get a ladder to climb so you can reach the rear panel to open it.
Or remove the plastic cover on your garage door opener.
Press the large “learn” button you see until there are light flashes. As soon as you see the light, press any button on your remote.
Once it’s done, your remote should be working now.
5. Adjust the Limit Screws
Sometimes, your garage door won’t fully close. It stops before touching the ground and doesn’t bounce back up.
This usually means you need to adjust something called limit screws.
These screws help your garage door opener know how far to open or close. Adjusting them isn’t difficult.
Here’s what to do:
- Grab a ladder and safely climb up to your garage door opener.
- Look for the rear panel or the plastic cover that holds the opener’s light bulb. Open it or remove the cover.
- You’ll see two plastic screws labeled “up” and “down.”
- Using a flat screwdriver, carefully twist the “down” screw just a little (about a quarter turn).
- Test your door. If it doesn’t fully close yet, keep turning the screw bit by bit and test each time.
- Stop adjusting when your garage door gently presses down onto the rubber seal at the bottom. If your door hits the floor and then goes back up, you’ve turned it too far. Turn the screw back slightly.
If this is too much for you to do, you can do a commercial garage door repair with any professional around you.
6. Check the Garage Door Manual
Your opener might show a blinking light when there’s an issue. Count the blinks and check your manual.
It will tell you what the blinking means.
If you lost your manual, no worries! You can find it online.
Just search your garage opener’s brand and model along with “trouble code,” and you’ll quickly see what to do next.
7. Manually Close Your Garage Door
If you can’t fix your garage door right away, before you look for the best commercial garage door repair near me, you can keep your garage secure by doing this:
- Pull down the bypass rope (it’s usually red) to disconnect the opener.
- Carefully close the door by hand.
- If your door doesn’t lock, look for holes in the door tracks. Slide a bolt through to keep it closed safely until help arrives.
Conclusion
Getting the best commercial garage door repair near me is usually the best bet whenever things go wrong with your garage door.
But you can still do some easy fixes yourself. The tips we shared here can help you fix a garage door that just won’t close.
Try them when next you notice an issue, and you can save money on repairs.
